You might be surprised at how easy it is to replace old roof shingles. Although this project is time-consuming and requires planning, we will walk you through the process.

Overview of the Project

For this project, you will need to have a few tools and materials. These include a hammer and screws, a prybar, a prybar, a utility knife and roofing felt paper. A helper is also helpful in this project. Let's get going!

Step 1: Take Out the Damaged Shingles

Use a screwdriver and a hammer to remove damaged shingles. You must be careful not to damage any good shingles that surround the damaged area. Use your wire brush to clean up any dirt or debris left in the area after the damaged shingles are removed.

Step 2: Size the replacement shingle

Get one of your new shingles and using your utility knife cut it down to size. The replacement shingle should be the same size as the one you just removed.

Step 3: Insert the replacement shingle

Now it is time to put the new shingle in place. Using 4 nails nail in the new replacement at each corner. Be sure to space your nails evenly.

Step 4 Repeat steps 1 through 3 until all Shingles have been replaced

Once you've replaced all the damaged or missing shingles it's time to give your roof a little bit of TLC by completing some maintenance tasks. These tasks include checking for loose nails, removing debris from gutters, and trimming back any trees or branches that might be hanging over your roof.

Congratulations! These steps roofing contractors Normal IL will ensure that you successfully replace any missing or damaged shingles from your roof. You should also make sure that you complete any maintenance tasks such as cleaning gutters and checking for loose nails. This will ensure that your roof lasts many decades.